North Carolina Highway 62
 North Carolina Highway 62 | ||||
|---|---|---|---|---|
 Route of NC 62 highlighted in red | ||||
| Route information | ||||
| Maintained by NCDOT | ||||
| Length | 84.4 mi[1] (135.8 km) | |||
| Existed | early 1920s–present | |||
| Major junctions | ||||
| South end |  NC 109 in Thomasville | |||
 I-85 in Archdale
 I-40 / I-85 in Burlington US 70 in Burlington US 158 in Yanceyville | ||||
| North end |  SR 62 at the Virginia line in Milton | |||
| Location | ||||
| Country | United States | |||
| State | North Carolina | |||
| Counties | Davidson, Randolph, Guilford, Alamance, Caswell | |||
| Highway system | ||||
| ||||
North Carolina Highway 62 (NC 62) is a primary state highway in the U.S. state of North Carolina. Primarily in the Piedmont Triad, it runs from NC 109 in Thomasville northeast to the Virginia state line in Milton.
Route description
[edit]
NC 62 begins in Thomasville at the intersection of Randolph Street (NC 109) and Julian Avenue; it is 0.4 miles (0.64 km) from I-85 and shadows the Interstate from Thomasville to Archdale. East of Archdale, it overlaps with NC Bike Route 2 through the communities of Climax and Julian. Before the town of Alamance, the highway goes right through the middle of the Alamance Battleground (the area will be marked with several colored flags and monuments). After crossing I-40/I-85, NC 62 does a zig-zag through downtown Burlington. Continuing north of town, it goes through the communities and towns of Pleasant Grove, Jericho, and Yanceyville, before reaching the town of Milton. After crossing the Dan River, it enters the Commonwealth of Virginia; where it continues for 4 miles (6.4 km) before ending on US 58/US 360, east of Danville, Virginia.
History
[edit]NC 62 was an original state highway; starting from Asheboro (then NC 70, currently US 221 Business), going northeast through Liberty and Graham, and ending in Yanceyville (then NC 14, currently Main Street). In 1928, the route was extended from Asheboro to New London, and again in 1930 from Yanceyville to Milton. In 1933, the route was moved north of New London and extended to Mount Pleasant.[2]
In 1940, NC 62 was realigned to a new routing south of Pleasant Grove to its now current routing through Burlington and Archdale, ending in Thomasville at NC 109. The former route to Mount Pleasant is now part of NC 49.[2]
In 1947, NC 62 was extended into Virginia, which also created VA 62. The last change to the route was between 1954–57, between the community of Fitch to Yanceyville, moving to a new road east; leaving behind Oak View Loop Road and Badgett Sisters Parkway.[2]
Major intersections
[edit]| County | Location | mi[1] | km | Destinations | Notes | |||
|---|---|---|---|---|---|---|---|---|
| Davidson | Thomasville | 0.0 | 0.0 | NC 109 (Randolph Street) / Julian Avenue – Denton | ||||
| Randolph |
No major junctions | |||||||
| Guilford | Archdale | 8.7 | 14.0 |   NC 610 west (Fairfield Road) | Eastern terminus of NC 610 | |||
| 9.2– 9.4 | 14.8– 15.1 |   I-85 to I-74 – Greensboro, Charlotte | Exit 113 (I-85) | |||||
| Pleasant Garden | 15.7– 15.9 | 25.3– 25.6 |   I-73 / US 220 – Greensboro, Asheboro | Exit 89 (I-73) | ||||
| Climax | 22.4 | 36.0 |   NC 22 south – Franklinville | Northern terminus of NC 22 | ||||
| Julian | 24.2– 24.4 | 38.9– 39.3 |  US 421 – Greensboro, Siler City | Interchange | ||||
| | 33.4 | 53.8 |   NC 61 north – Whitsett | Southern terminus of NC 61 | ||||
| Alamance | Burlington | 41.4– 41.5 | 66.6– 66.8 | I-40 / I-85 – Greensboro, Durham, Raleigh | Exit 143 (I-40/I-85) | |||
| 42.7 | 68.7 | US 70 west (South Church Street) | Southern end of US 70 concurrency | |||||
| 42.8 | 68.9 |   NC 54 east (Chapel Hill Road) | Western terminus of NC 54; access to and from US 70 eastbound / NC 62 northbound | |||||
| 44.4 | 71.5 |   NC 87 / NC 100 (Webb Avenue) | ||||||
| 44.8– 44.9 | 72.1– 72.3 | US 70 east (North Church Street / North Fisher Street) / Holt Avenue | Northern end of US 70 concurrency (US 70 is a one-way pair) | |||||
| Pleasant Grove | 54.8 | 88.2 |  NC 49 – Haw River, Roxboro | |||||
| Caswell | Yanceyville | 72.0 | 115.9 |  US 158 west / NC 86 north – Danville | Southern end of US 158 / NC 86 concurrency | |||
| 72.2 | 116.2 | US 158 east / NC 86 south – Hillsborough | Northern end of US 158 / NC 86 concurrency | |||||
| Milton | 84.0 | 135.2 |  NC 57 south (Broad Street) – Roxboro | Northern terminus of NC 57 | ||||
| | 84.4 | 135.8 | SR 62 north – Danville | Virginia state line | ||||
1.000 mi = 1.609 km; 1.000 km = 0.621 mi
| ||||||||
Special routes
[edit]Historically there was one 3-mile-long (4.8 km) alternate route in New London, from 1935-1940; it was labeled as NC 62A. It was soon renumbered as NC 49A when NC 49 replaced NC 62 in the area.[3] Later, in 1947, it would renumber again to NC 6, then finally in 1953 as an extension and terminus of NC 8.[4]
See also
[edit]- North Carolina Bicycle Route 2 - Concurrent with NC 62 from SR 1129 near Jamestown to Kimesville
- North Carolina Bicycle Route 4 - Concurrent with NC 62 from Yanceyville to Hamer
References
[edit]- ^ a b "North Carolina Highway 62" (Map). Google Maps. Retrieved April 27, 2015.
- ^ a b c "NCRoads.com: N.C. 62". Retrieved 2011-01-03.[self-published source]
- ^ "NCRoads.com: N.C. 62-A". Retrieved 2011-01-02.[self-published source]
- ^ "NCRoads.com: N.C. 6". Archived from the original on 2010-11-25. Retrieved 2011-01-02.[self-published source]
External links
[edit]
Media related to North Carolina Highway 62 at Wikimedia Commons- NCRoads.com: N.C. 62
